EEPM-CIRA Series
Suitable for use on Vertical Lathe, CNC 5 Axis Machining Center ...etc.
Features & Specification
Option Accessories
Working Example: ID positioning and OD machining by Induction Block.
Applications Drawings
.jpg)
Features & Specification
Dimension of screw holes for setting up
Features
- Round type and radiate magnetic poles, suitable for clamping round type and any form of workpiece machining.
- Workpieces can be touch to all poles of Magnetic Chuck, super power magnetic force as minimum of 1340Kgf (I.34tons) ±5% and maximum of 60,400Kgf (60 tons)±5%, it depends on size of workpiece and magnetic chuck.(Please refer to the spec. list)
- 1~10 seconds control for power ON & OFF. No electric power supply required to keep the magnetic chuck ON, cable can be taken off for turning chuck freely while machining.
- Un-obstructed movement of cutters during machining, the really functions of 5 side machining on workholding.
- Design of Electric-Permanent, never gets temperature to effect the accuracy of workpieces.
- Suitable in use for combine with Vertical Lathe, CNC 5 Axis Index Device, CNC 5 Axis Machining Center ...etc.
-
Minimum dimension of workpiece required as£º
- EEPM-CIR500-φ300mm £»EEPM-CIR600-φ360mm
- EEPM-CIR800-φ500mm £»EEPM-CIR1000-φ500mm
- EEPM-CIR1250-φ850mm£»EEPM-CIR1500-φ850mm
- EEPM-CIR1600-φ1200mm £»EEPM-CIR1800-φ1200mm
or same dimensions of any other forms of workpiece. - More functions for cooperate with induction plate, can do positioning on workholding.
Option Accessories-Induction Block
- Induction Block EEPM-CIRIB series are use for EEPM-CIR chucks, can do many more functions on workholding.
- Convenience and Accuracy: Induction Block are interchanging & consuming accessories, you can machining surface or forming induction blocks for the workpiece required by the machine directly, so the parallelism of induction block will always 100% match to the machine.
Working Example: ID positioning and OD machining by Induction Block.
Applications Drawings
Working Example
