EEPM-CIR
EEPM-CIR EEPM-CIR MagVise Magnetic Workholding (for Vertical Lathe) Earth- Chain Selangor, Malaysia, Kuala Lumpur (KL), Puchong Supplier, Suppliers, Supply, Supplies | MES MOULDING EQUIPMENT SUPPLIES SDN BHD
Download Files
EEPM-CIR.pdf (189.15 KB)
Suitable for use on Vertical Lathe, CNC 5 Axis Machining Center ...etc.

Features & Specification

Features :

  • Super power magnetic force 1250 kgf/100 cm (4 poles), can meet various machining process.
  • Structure of Electro-Permanent Magnetic Chuck, no electric power supply required to keep the chuck On, it could be used for long time and never get temperatures to affect the accuracy of workpiece.
  • Using innovation series and parallel connection modular system, EEPM-C provides a more economic solution to hold various size workpiece. Flexible units could be deployed with various quantities, locations, and distance to each other depending on customers' various workpiece shapes. Save time and cost during machining and increase the accuracy that makes the goods have higher quality and value.
  • According to the size of the workpiece [point] hold the workpiece, changing the magnetic fixture [surface] clamp the workpiece, 100% use of the chuck in an all-round way. Can reduce equipment costs and increase more profits.
  • Without any obstructed movement of cutters during machining. Can do 5-sides machining, drilling, tapping, grooving and forming can be done all in one cycle. This greatly enhances work efficiency, and reduces repeated positioning tolerances to achieve best machining accuracy.
How to choose :

According application requirement can choose EEPM-C Series as following steps :
 
  1. Choose number of chucks according to Voltage and workpiece required.
  2. Choose Chuck Controller.
  3. Choose the length of Chuck Connection Cables.
  4. Choose the Screw Size.
  5. Choose the length of Power Cord.
Note: A maximum of 16 chucks can be connected to one controller. If the workpiece dimension requests more than 16 chucks please use two groups of chucks unit.

 



Standard and Option Accessories



Standard Accessories: Induction soft block

Convenience and Accuracy:£º
The induction blocks screwed on the magnetic chuck are replaceable and consumable accessories. You can fine grinding the surface or forming induction blocks according to requirements of workpiece by the machine directly that the parallelism of induction blocks can be 100% with the machine and the 5-sided machining can be easily conducted.

Standard accessories (Screw Size)



Chuck installation direction:



Chuck Connection Cable:

 

Connection Table



Notice£º
  1. EEPM-C Series each voltage has two specifications can be choose, each specification has four models EEPM-CS1, CS2, CS3 and CS4 can be connected but each model can be up to 4 units only.
  2. The controller EEPM-C4C can be controlled EEPM-CS1, CS2, CS3 and CS4 each of them 4 pieces at same time.
  3. Maximum distance required:
Applications Drawings

Example of Vertical Lathe on Setting:


Example of Double Column Machining Center and CNC Machining Center on Setting
 

Working Example
 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version