MC Hydraulic & Angle Lock Vise
Features
The unique features of AHV series provide the users an operation of ease and comfort.
1.Angle-lock type Hydraulic vise model:AHV is mostly suitable for heavy duty cutting on Vertical Machining Center.
2.Semi-spherical segment eliminates jaw lift and workpiece tiltt.
3.Rigid material ductile iron FCD60 with 60 Kgs/mm2 ensures high tensile strength, low weariness and not deformation.
4.Vise bed flame hardened to HRC 45o up is capable to obtain low weariness and last the high accuracy for long.
5.For (4) different jaws set up can be obtained.
6.Chip covers is applied on this vise to prevent from chips falling to Leadscrew and inside vise.
Description
Accuracy testing standard
Specification
Model : AHV
Accuracy testing standard
NO | Item | JIS grade 1 | Guaranteed |
---|---|---|---|
1 | Vise side-lock on bottom slide way squard |
0.020 100mm |
0.010 100mm |
2 | Keyways on bottom of vise bed square to clamping surface of jaw plate |
0.020 100mm |
0.015 100mm |
3 | Both jaw plate parallel |
0.020 100mm |
0.020 100mm |
4 | Max opening test block parallel to bottom of vise body |
0.050 100mm |
0.030 100mm |
5 | Top of rectangular test block clamped tightly by jaw parallel to bottom of vise body |
0.030 100mm |
0.020 100mm |
6 | Surface of vise bed parallel to bottom of vise body |
0.020 100mm |
0.015 100mm |
Specification
Jaw width | Jaw opening | Depth of Jaw | Over all height | Over all length | Max Jaw opening |
---|---|---|---|---|---|
160mm | 280mm | 60mm | 160mm | 647mm | 540mm |